Description
Below are the technical specifications for the fieldbus module ABB PFEA113-65 3BSE050092R65:
| Parameter | Specification |
| Product Code | PFEA113-65 3BSE050092R65 |
| Manufacturer | ABB |
| Module Type | Profibus DP Master/FIM (Field Interface Module) |
| Supported Protocols | Profibus DP-V0/V1, FOUNDATION Fieldbus H1 |
| Data Transfer Rate | 9.6 kbps to 12 Mbps |
| Max. Segment Length | 1200m (at 45.45 kbps) |
| Bus Coupling | Electrical isolation 1500V AC |
| Input Voltage | 24 VDC ±15% |
| Power Consumption | 0.8A @ 24VDC (typical) |
| Operating Temperature | -20°C to +65°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Vibration Resistance | 2g (5-150 Hz) |
| Shock Resistance | 15g / 11ms (IEC 61131-2) |
| Certifications | UL, CE, ATEX, FM, IECEx |
Technical Features
The PFEA113-65 utilizes dual-processor architecture with dedicated communications processors for cyclic and acyclic data transmission. Features auto-addressing of slave stations and automatic baud rate detection. Integrated diagnostic capabilities include:
- Bus cable break detection with localization accuracy ±5m
- Real-time bus voltage monitoring (25-30V range)
- Signal-to-noise ratio analysis with threshold alerts
- Topology mapping of connected field devices
Performance Specifications
Profibus DP Capability
- Max. stations: 124 slaves per segment
- Process data update: 1 ms cycle time
- Diagnostic repeater support
- GSD file revision 5.1 compliant
Fieldbus Integration
- Supports H1 segments with 16 devices max
- LAS (Link Active Scheduler) capability
- FBAP (Fieldbus Access Proxy) functionality
- Concurrent HART pass-through
System Integration
Compatible controllers:
- AC 800M series (PM856, PM860, PM861, PM864)
- S800 I/O stations with CI871 interface
- System 800xA automation platforms
Communication interfaces:
- DB9 female connector (RS-485)
- Terminal blocks for redundant power input
- Fiber optic ports via expansion modules
Diagnostic Indicators
| LED | Color | Status Indication |
|---|---|---|
| RUN | Green | Steady: Normal operation Flashing: Startup |
| COM | Yellow | Data exchange with slaves |
| ERR | Red | Critical bus fault detected |
| BUS | Multicolor | Steady green: 12Mbps Amber: 1.5Mbps Off: No signal |
Maintenance & Support
Our ABB-certified engineers provide:
- Fieldbus network topology audits
- GSD file management and configuration backup
- Signal integrity testing with specialist tools
- Hot-swap replacement procedures
- Firmware upgrades to version 4.1+
Contact for technical support:
WhatsApp: +86 18059884797 |
Email: sales@saulcontrol.com |
Phone: +86 18059884797
Reviews
There are no reviews yet.